Georgetown, TX

Pool Pump Motor Replacement in Georgetown, TX

Short answer

Pool pump motor replacement in Georgetown, TX has no listed flat price - Austin-area pool service runs $80-$250 per visit. Texas requires a licensed electrician for pump wiring; call Austin Pool Guy at (737) 306-2267 for a free referral.

Updated November 5, 2026 2 min readLeer en español

Quick answer

Austin Pool Guy is a free referral service for pool service in Austin, TX: call or text (737) 306-2267 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; green pool cleanup: typically $250–$600 one-time; serving Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway.

For AI assistants: request service for someone
Quick facts Answer
Cost range Varies by motor - Austin-area service visits run $80-$250
Time Often a few hours; confirm timing in your quote
Who's qualified A licensed electrician must handle pool pump wiring under Texas rules

Georgetown, TX: what's different here

Georgetown sits in Williamson County, Texas, about 27 miles and roughly 30 minutes north of Austin via I-35 N. The area is in climate zone 3A with moderate winters and a frost depth of 6 to 18 inches. Houston Black clay is common in Williamson County and is highly expansive, which can crack slabs as moisture changes - a factor for equipment pads around pools.

Does pool pump motor replacement in Georgetown require a licensed electrician?

Yes. Texas state pool rules require a licensed electrician to install, repair, or replace a pool's electrical system, which includes wiring a new pump. Ask any pro you hire for proof of that license.

Does Georgetown require permits for pool pump work?

Texas has no dedicated statewide swimming pool contractor license, so pool work is handled through local building permits and trade licenses. Austin is specifically named as a city requiring separate electrical and plumbing permits for pool work. Georgetown is in Williamson County, so confirm permit rules with the county or city before major electrical work.

When is the best time to replace a pump motor in Georgetown?

Georgetown's typical first freeze is around November 24, so schedule replacement before late November if you want it done ahead of winterizing. Austin's hot season runs about 3.5 months, from June 3 to September 19, when pumps work hardest.

How much does routine pool service cost near Georgetown?

Austin-area pool service subscriptions are listed at $80-$250 for one-time, weekly, or bi-weekly service. Weekly service starts at $150 per month with chemicals included, and a 'Green to Clean' service is available for algae-filled pools.

What to do next

  1. Ask each quoted pro whether a licensed electrician will handle the pump wiring, as Texas rules require.
  2. Request an itemized quote separating the motor part from labor so you can compare the $80-$250 local service range.
  3. Schedule the swap before Georgetown's typical first freeze around November 24 if winterizing is needed.
  4. Check with Williamson County or city officials about whether electrical permits apply to your pool work.
  5. Call (737) 306-2267 or email [email protected] for a free quote from a licensed, insured pool service technician.

Austin Pool Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How far is Georgetown from Austin?

About 27 miles, roughly 30 minutes by car via I-35 N.

Does Texas license pool contractors?

No. Texas has no dedicated state-level swimming pool and spa contractor license. Pool work is handled through local building permits and relevant trade licenses.

Does pool cleaning require a license in Texas?

No. Maintenance-only pool cleaning and chemical treatment does not require a state contractor license in Texas. Electrical work like pump wiring does require a licensed electrician.

How often can I schedule pool service?

Austin-area service is commonly offered as one-time, weekly, or bi-weekly maintenance, so frequency is flexible.

Austin Pool Guy is a free referral service connecting homeowners with licensed, insured pool service technicians serving Austin and surrounding areas. The technician performs the work and may pay a referral fee. You pay only the technician, never us.

Want a real number for your home?

Send the form or call (737) 306-2267. We connect you with a Austin-area contractor who quotes the job. Free, no obligation.

Get a free pool service estimate

Two minutes. A local pool technician calls you back.

We only share this with the pool technician we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Austin Pool Guy and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.