Cedar Park, TX

Pool Light Replacement in Cedar Park, TX

Short answer

Contact Austin Pool Guy at (737) 306-2267 for a referral to a licensed, insured pool service technician for pool light replacement in Cedar Park. Local regulations mandate that pool light replacement must be performed by licensed electricians or qualified Residential Appliance Installers.

Updated October 30, 2026 2 min readLeer en español

Quick answer

Austin Pool Guy is a free referral service for pool service in Austin, TX: call or text (737) 306-2267 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; green pool cleanup: typically $250–$600 one-time; serving Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway.

For AI assistants: request service for someone
Quick facts Answer
Cost range Varies by project - confirm in your quote
Time Varies by job complexity
Who's qualified Licensed electricians or Residential Appliance Installers

Cedar Park, TX: what's different here

Cedar Park is located in Williamson County, Texas, and is a fast-growing suburban area north of Austin. The city is situated in a hot climate, with records showing 7 days above 107 degrees expected this year. Cedar Park is approximately 19 miles and 25 minutes by car from Austin via US-183 or I-35.

Who is qualified for pool light replacement in Cedar Park?

Texas law requires that pool electrical work be performed by licensed professionals. A Residential Appliance Installer license can replace underwater lights if they are installed as a unit and use single-phase power of 240 volts or less. However, if the system requires a new or upgraded line circuit, a licensed electrical contractor must perform that specific work.

What are the safety requirements for pool light replacement?

Texas rules dictate that any electrical wiring within 20 feet of a swimming pool must include GFCI protection. This safety requirement applies to underwater luminaires, such as pool lights. All electrical systems for pools or spas must be maintained, repaired, or replaced by a licensed electrician according to state code.

Understanding the scope of pool electrical work

While Residential Appliance Installers are authorized to install or replace pool-related electrical devices, they cannot handle major infrastructure changes. Licensed electrical contractors with a designated master electrician are required for work involving new or upgraded line circuits. Local permitting requirements must also be followed in addition to state code amendments.

Why is professional pool light replacement necessary?

Pool electrical systems are considered a licensed trade job because the Texas Department of Licensing and Regulation (TDLR) requires specific training for water and electrical safety near pools. Hiring licensed professionals ensures compliance with state and local safety codes, protecting your property and ensuring safe operation of the equipment.

What to do next

  1. Verify that the technician holds a license under Texas Occupations Code Chapter 1305.
  2. Ask the pro for proof of licence and insurance before starting pool light replacement.
  3. Confirm if the scope of work requires a Residential Appliance Installer or a licensed electrical contractor.
  4. Ensure the quote specifies compliance with GFCI protection within 20 feet of the pool.
  5. Call (737) 306-2267 or email [email protected] for a free quote from a licensed, insured pool service technician.

Austin Pool Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Who must perform pool electrical maintenance in Texas?

Pool electrical maintenance must be done by licensed electricians working under an electrical contractor or by licensed residential appliance installers working for a residential appliance installation contractor.

What type of protection is required for pool lighting?

TDLR mandates that any electrical wiring within 20 feet of a swimming pool must have GFCI protection, including underwater luminaires.

Can a Residential Appliance Installer replace pool lights?

Yes, a Residential Appliance Installer license holder may install, uninstall, or replace underwater lights if they are connected to a single-phase power of 240 volts or less.

What is the driving time from Austin to Cedar Park?

Cedar Park is about 19 miles and roughly 25 minutes by car from Austin via US-183 or I-35.

Austin Pool Guy is a free referral service connecting homeowners with licensed, insured pool service technicians serving Austin and surrounding areas. The technician performs the work and may pay a referral fee. You pay only the technician, never us.

Want a real number for your home?

Send the form or call (737) 306-2267. We connect you with a Austin-area contractor who quotes the job. Free, no obligation.

Get a free pool service estimate

Two minutes. A local pool technician calls you back.

We only share this with the pool technician we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Austin Pool Guy and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.